Platform series no. 08/ 09
METROLOGY SERIES
NANSI Series
Multi-Channel Wafer Metrology System Series

One platform. Every measurement.
- Front + backSynchronized dual-side probes
Thickness / TTV · Bow / Warp
- Metal layersAccurate on composite stacks
Bonded wafers · Metallized wafers · Per-layer thickness
- Sub-micronMinimum TSV / TGV CD
Deep vias · Trenches · High aspect ratio · Non-contact
01PRODUCT INTRODUCTION
Overview
NANSI is a fully non-contact, multi-channel optical metrology platform. Front and back probes measure simultaneously, and a single system covers thickness / TTV, Bow / Warp, film and bonded-stack thickness, trench / TSV / TGV depth and CD, step height and roughness. TSV / TGV CD can be measured down to the sub-micron range, and composite stacks with metal layers are measured just as accurately. Applications include advanced packaging, front-end thinning / CMP, power-device trenches, and geometry metrology of silicon and compound substrates.
Measurements
- Thickness / TTV
- Bow / Warp
- Film / stack thickness
- Trench / TSV / TGV
- Step height
- Roughness
Applications
- Advanced packaging: TSV / bonding / glass substrates
- Front-end thinning / CMP
- Power-device trenches
- Silicon / SiC substrate geometry
- 3D memory structures
02PRODUCT FEATURES
Key features

Front and back, measured together
Thickness, TTV, Bow and Warp in a single pass, with gravity compensation.
Accurate through metal layers
Every layer of bonded, metallized and other composite stacks measured in one pass.
Non-contact via and trench metrology
TSV / TGV CD down to the sub-micron range, with depth and CD of high-aspect-ratio trenches measured without contact.
PLANCKADC · Yield-management ready
Results flow straight into PlanckADC
AI classification and grading, result monitoring with SPC, and Wafer Map traceability, connected to your MES / YMS.
About PlanckADC03MORE SYSTEMS
Other systems
- KIBO SeriesUnpatterned Wafer Defect Inspection SystemInspection
- ACONCA SeriesFully Automatic Patterned Wafer Optical Inspection SystemInspection
- CANIGO SeriesAutomatic Wafer Backside Inspection SystemInspection
- MUSHI SeriesAutomatic Wafer Edge Inspection & Metrology SystemInspection
- CARPPA SeriesFast Inline Process Control SystemInspection
- VEYMONT SeriesFull-Surface Nano-Topography Inspection SystemInspection
- DRAKENS SeriesSiC Wafer Surface & Crystal Defect Inspection SystemInspection
- ELBRUS SeriesFull-Wafer Geometry Metrology SystemMetrology
PRODUCT INQUIRY
Discuss yourprocess needs
We match a platform to your material, process step and the parameters you care about.
- SalesProducts and commercial inquiriessales@plancksemicon.com
- GeneralCorporate affairs and partnershipsinfo@plancksemicon.com
- Head office
- 11/F, Block B, Long Guang Century Building, Bao’an Center, Bao’an District, Shenzhen, China
- Phone
- +86-755-21063549

